Baotou steel belt packer operation operation

Play clad steel belt packer operation operation ( 1) Switch on the machine power supply, turn the power supply handle to the open position, according to the motor starter button. ( 2) In full of wool top position good plastic packaging tube and into the packer locating ring. ( 3) Clockwise operation handle, the handle will be engraved with tags to & other On the pressure plate down & throughout; The location of the. Down on the pressure plate movement, one with walking wool top, prevent skewed another person I turn on the pressure plate, pressure plate in the history of the mark in the article with the aim of mark in the cylinder, until 10 - twisting the article from the barrel of the plate 20 centimeters. ( 4) Turn the handle to the & other; Press set up & throughout; The location of the. Press plate into the bottom of the empty drum, promote the false bottom, launch tube of wool top, top pressure between the upper and lower pressure plate, until the end of press plate of fake article tube, push upward movement on the pressure plate. ( 5) Turn the handle to the & other; Upper and lower pressure plate to stop & throughout; The location of the pressure plate stop moving up and down. ( 6) Two people will wear hemp rope four long needle wear into the chassis trough and at the same time, both at the same time from the corresponding trough and the pressure plate, the rope tied tight knot. Remove the needle. ( 7) Turn the handles to the & other; Press set down & throughout; Position, at this time, the downward movement of press, the pressure plate, reset up until regeneration in situ. Press plate down, false bottom marked with a tag on the cylinder alignment. ( 8) Car after a person, after being false chassis in a barrel, to move from a barrel on the hair bulb, weighing, recording, loading, pp plastic bag. The front one, stay, false floor on rotating handles to & other; Upper and lower pressure plate to stop & throughout; , according to the motor stop button, pull out the empty cone, position well on cylinder of plastic bags. ( 9) Push the wool top bag into the warehouse, neatly placed in the designated place, according to the requirement to check incoming.