Brief introduction of packing strip sorter

Brief introduction of packing strip sorter
The composition of the packaging steel belt sorter is shown in Figure 6.42. It is equipped with several horizontal push-out devices on the steel belt conveyor, and a sorting gate is set corresponding to each push-out device. When the goods arrive at the predetermined sorting opening, the horizontal pushing device toggles the goods so that they slide out from the side of the steel belt conveyor and fall into the corresponding sorting gate.

　　The packaging steel belt sorter uses packaging steel belts with a smooth surface. Because the friction coefficient between the packaging steel belt and the goods is small, it has good adaptability to the goods and can not be packaged in cartons, wooden boxes, bags, etc. Formal restrictions. Due to the high running speed of the packaging steel belt (up to 120m/min), the sorting speed is fast, and the sorting capacity can reach more than 10,000 pieces per hour. The steel belt sorter has higher requirements for the material of the packaging steel belt, and stricter requirements for the processing cost of the packaging steel belt and its joints. The steel belt sorter has a certain impact on the goods when it is working. It is not suitable for items that are too thin, easy to roll, and fragile. In addition, when the design speed of the steel belt sorter is high, the sorting opening cannot be designed. Too dense, that is, the number of sorting openings is generally small.
　　The horizontal sentence push-out device of the steel belt sorter usually adopts electric or pneumatic baffle, and its movement speed and angle should be appropriate, so that the goods can be pushed out quickly and accurately. In order to minimize the impact on the cargo, sometimes the baffle is made into a broken line or divided
　　 is divided into two sections to achieve the purpose of 'flexible sorting'.