Causes of breakage in the production process of iron strapping

Iron strapping straps have high tensile strength, good elongation, and narrow strips with different shapes and widths. They are widely used in many industries. Fractures occurred in the production of iron strapping, which had a certain impact on the production of enterprises. Through long-term research and analysis, it has been found that the reasons for the breakage of the iron strapping in production mainly include the following points:, The iron strapping is easily burned or broken due to shrinkage or cracks in the raw material during the intermediate frequency heating process; During the production process, the guide wheels or the insulating rollers are stuck, causing excessive tension, and finally causing the iron strap to be broken;, the low lead level in the heat treatment tank causes the lead liquid to flow unsmoothly, and the uneven lead temperature causes the iron sheet Uneven transformation of the strapping leads to breakage of the iron strapping strap. During the production process, the iron strapping straps are broken due to the raw materials, technology, transformation process, etc., which seriously affects the normal production of the enterprise and consumes a lot of manpower, material resources and costs. Therefore, the improvement of the production technology of the iron strapping straps has become especially important.