Latest products
Comparison of the advantages of three packing steel belt joints
by：Hongmei
2021-03-15
Comparison of the advantages of three packing steel belt joints
I believe you should understand the use of galvanized steel straps. Today we will briefly introduce three common joint methods of galvanized steel straps for your reference.
1, ligation type: This type of joint uses soft plastic rope, hemp rope, etc. as the binding material, and the joint is tied into a slip knot. The plastic-steel strapping with this joint method is firm and beautiful, and easy to untie.
2. Hot-melt lap type: It adopts heating methods such as electric heat welding, mechanical high-frequency oscillation welding and ultrasonic welding. The surface layer of the plastic belt is heated and melted, and the melting surfaces of the two belt ends are overlapped. Keep it for a certain period of time. After the melting surface is condensed, the plastic tape joint is bonded.
3. Iron buckle type: This method is to use the one-way work of the tensioner ratchet to make the belt tighten, then place an iron buckle at the joint, and then use clamps to make the iron buckle wrap the two layers of belt And the side teeth of the iron buckle are concave and convex, and bite the belt to prevent it from loosening. The iron buckle is usually made of galvanized iron sheet, and the iron buckle of the suitable specification should be selected according to the type of strapping belt during operation.
I believe you should understand the use of galvanized steel straps. Today we will briefly introduce three common joint methods of galvanized steel straps for your reference.
1, ligation type: This type of joint uses soft plastic rope, hemp rope, etc. as the binding material, and the joint is tied into a slip knot. The plastic-steel strapping with this joint method is firm and beautiful, and easy to untie.
2. Hot-melt lap type: It adopts heating methods such as electric heat welding, mechanical high-frequency oscillation welding and ultrasonic welding. The surface layer of the plastic belt is heated and melted, and the melting surfaces of the two belt ends are overlapped. Keep it for a certain period of time. After the melting surface is condensed, the plastic tape joint is bonded.
3. Iron buckle type: This method is to use the one-way work of the tensioner ratchet to make the belt tighten, then place an iron buckle at the joint, and then use clamps to make the iron buckle wrap the two layers of belt And the side teeth of the iron buckle are concave and convex, and bite the belt to prevent it from loosening. The iron buckle is usually made of galvanized iron sheet, and the iron buckle of the suitable specification should be selected according to the type of strapping belt during operation.
