Corrosion reasons and storage requirements of indoor metal strapping

Reasons for corrosion of indoor metal strapping: 1. Indoor air humidity is too high. , Metal products are stored without drying. , There is a water film on the surface of the product. When the moisture content in the air reaches more than half, or in a higher range, and the PH <, the corrosion reaction is more serious. When the water temperature is as high as about ℃, the corrosion rate of the zinc layer is very fast Storage requirements: When stacking metal straps, there is no condensation on the surface. , The warehouse should maintain air circulation, and the relative humidity of the air should not be between fixed values. , There should be no harmful gas and excessive dust when stacking metal straps.