Introduction of finishing equipment for packaging steel strip production

Packaging steel strip finishing equipment used in production profile, 1. Temper mill of hot rolled plate ( Room temperature) In order to 0. 1 - 0. 3 hot small reduction and 0. 5 - 1. 5% of elongation to level off, can improve the properties of the hot plate volume and surface properties. 2. Shear line shear line was conducted at room temperature for hot-rolled coil open-book, and continuously according to the fixed width, fixed-length, on steel plate shear line. In steel plate straightening straightening machine, trimming machine cutting in disc type, on the shear machine cut into specified length. 3. Longitudinal cutting disc shear line in accordance with user requirements of the width of the shear hot-rolled coil cutting line is called a longitudinal cutting disc line. There are three kinds of shearing, coiler tension shear: use disk slitting drive shear: both and use. Longitudinal cutting thick plate with the third method. 4. Baling packaging factory that produce a product, according to the prescribed specifications, check, print or stencil printing, packing on banding, leaving the factory.