Mainly talks about the stainless steel belt packaging fusion

In the daily operation process of stainless steel straps, there might be some problems, such as stainless steel straps broken excessive fusion or fusion process, when these problems we should how to do? Today give you a simple analysis of the reasons for this situation and solution. A, stainless steel straps break the cause of the problem in the process of fusion: 1. Packing tape thickness is not enough; 2. The fusion time is not long; 3. Friction fusion part cooling time is too short; Solution: 1. With the correct specifications of the packing machine packing belt, or according to adjust the baling press stainless steel straps specifications; 2. According to the need to shorten the fusion time; 3. After the fusion, keep 3 seconds, after the fusion packer can't remove from packaging. Second, packaged with fusion is incomplete or not fusion solution: 1. Hold the reversal valve to release the stainless steel packing belt tension; 2. Handle tension on the operation, the tensioner, linking to the exhaust valve and open the valve. Above is today to tell you about the stainless steel straps excessive fusion or broken in the fusion process, hope to help you, if you have any need, welcome to visit our company to negotiate business.