Latest products
Operation operation of strapping steel strapping machine
by：Hongmei
2021-03-15
Operation operation of strapping steel strapping machine
(1) Turn on the power of the machine, turn the power handle to the on position, and press the motor start button.
(2) Put a plastic bag on the packing drum filled with tops, and push into the positioning ring of the packing machine.
(3) Turn the operating handle clockwise to turn the marked handle to the 'upper plate down' position. The upper platen moves downwards, one person holds the top with his hand to prevent skewing. The other person rotates the upper platen to align the mark on the upper platen with the mark on the can until the upper twist plate is 10-20 away from the can. cm.
(4) Turn the handle to the 'press plate up' position. The lower pressure plate extends into the empty bottom can and pushes the false bottom to push out the top in the can. The top is pressed between the upper and lower pressure plates until the false bottom of the lower pressure plate pushes out the can and pushes the upper pressure plate upward.
(5) Turn the handle to the 'up and down pressure plate stop' position, and the upper and lower pressure plates stop moving.
(6) Two people put the four long needles with hemp rope into the grooves of the lower chassis at the same time, and at the same time pass them out of the corresponding grooves of the upper pressure plate, and tie the ropes tightly and knotted. Remove the long needle.
(7) Turn the operating handle to the 'lower pressure plate down' position. At this time, the lower pressure plate moves downward, and the upper pressure plate resets upward until it returns to its original position. When the lower plate is down, the mark on the false bottom should be aligned with the mark on the can.
(8) There is one person behind the car. After the fake chassis enters the can, the hair ball is removed from the can, weighed, recorded, and put into a polypropylene plastic bag. A person in front of the car, when the false bottom reaches the bottom, turn the operating handle to 'up and down pressure plate stop
(9) Push the top package into the warehouse, place it neatly in the designated place, and check it into the warehouse according to the regulations.
(1) Turn on the power of the machine, turn the power handle to the on position, and press the motor start button.
(2) Put a plastic bag on the packing drum filled with tops, and push into the positioning ring of the packing machine.
(3) Turn the operating handle clockwise to turn the marked handle to the 'upper plate down' position. The upper platen moves downwards, one person holds the top with his hand to prevent skewing. The other person rotates the upper platen to align the mark on the upper platen with the mark on the can until the upper twist plate is 10-20 away from the can. cm.
(4) Turn the handle to the 'press plate up' position. The lower pressure plate extends into the empty bottom can and pushes the false bottom to push out the top in the can. The top is pressed between the upper and lower pressure plates until the false bottom of the lower pressure plate pushes out the can and pushes the upper pressure plate upward.
(5) Turn the handle to the 'up and down pressure plate stop' position, and the upper and lower pressure plates stop moving.
(6) Two people put the four long needles with hemp rope into the grooves of the lower chassis at the same time, and at the same time pass them out of the corresponding grooves of the upper pressure plate, and tie the ropes tightly and knotted. Remove the long needle.
(7) Turn the operating handle to the 'lower pressure plate down' position. At this time, the lower pressure plate moves downward, and the upper pressure plate resets upward until it returns to its original position. When the lower plate is down, the mark on the false bottom should be aligned with the mark on the can.
(8) There is one person behind the car. After the fake chassis enters the can, the hair ball is removed from the can, weighed, recorded, and put into a polypropylene plastic bag. A person in front of the car, when the false bottom reaches the bottom, turn the operating handle to 'up and down pressure plate stop
(9) Push the top package into the warehouse, place it neatly in the designated place, and check it into the warehouse according to the regulations.
