Packaged with introduction to the winding device

Packing tape winding device since extruder extrusion cooling, profile products to draft, secondary heating, drawing, embossing, finalize the design has reached the requirements of various performance and specifications. The effect of winding device is to finalize the design pack flat, both sides in elastic winding on the winding disc reasonably. Therefore require coiling device can provide stepless adjustment is not due to reel diameter changing winding speed and elastic moderate strength, easy to change and adapt in a short time. Generally adopted to adjust the size of the friction and achieve this goal. Working principle is: in the drive device for a friction wheel, there is an outside with the adjustment of the friction plate round, two rounds of sandwiching a gear drive winding roll shaft turns, with the adjustment of the friction plate wheel in the spring, under the pressure of the drive gear running winding. Adjust the wheel play Hong and change the friction, take-up speed and the elastic moderate tension. With the improvement of automation level and output, automatic winding roll. So he developed a variety of automatic volume change of take-up device. Winding device according to different divided into manual packing tape, the purpose of the product machine two devices with packing belt, hand packing tape is common hand used in baling press, single-layer winding into the coil. Machine with packing belt is to use automatic packing machine with packaging, packaging with the winding machine, winding into multi-layer neat rows of disc, per piece in the center there is a will be effected according to the packing machine shaft diameter pore shape garden, so that automatic packaging, can rotate freely when packing.