Packer seal replacement instance

Packer in the production of oil seal replacement instance, may be due to oil seal aging or wear causes such as leakage or leakage. Replace the oil seal is convenient, sometimes more trouble sometimes. In production, quick change oil seal can save time, this way is worth reference. A MDY107 - 200 a press type packing machine piston cylinder leakage of cylinder head. Change oil seal in accordance with the normal method, must dismantle briquetting, dust cover, the cylinder head. In order to prevent the decline in the piston rod must also open the cylinder head on, lifting hoist will hang on piston rod. After analysis, decided not to dismantle briquetting and only put a round steel at the bottom of the press block a, prevent the decline in the piston rod. Remove the cylinder head bolt under, then remove old o-ring seal cutting, to form oil seal, O with scissors & 45 deg. Clipping or degree, small can be put into o-ring groove, screw as long as an hour, on the production run normally. The new oil seal in the valve or plunger and other components are installed on the sometimes difficult. Can be used at this time the hydraulic oil or water into the basin, and then put the new oil seal in the basin for heating, oil seal with the temperature of oil is soft, fast from the oil pan oil seal installation, such as oil seal after the temperature is lowered, installation of components. The company specializing in the production of packaging steel strip, welcome the masses of customer calls business negotiations.