Packing belt production line of the examination before operation

In order to better production packing tape, packing belt production line to do a good job in advance, so specific how to do the work? Please look down: 1, the preparation work we must first check equipment, packing belt with whether it is right, then to check whether there is any damage on the power supply wire, then check all moving parts are in lubrication, also want to have a look at the packing belt production line is fixed do not move, should be prepared after the outside wrapping paper. 2, matters needing attention in addition to special remind is forbidden to wear into the packing belt, is strictly prohibited operation when disassembling equipment such as dangerous action. 3, after end of operation in operating the packaging production line, remember to cut off the power supply, and close the switch, prevent leakage phenomenon, cause people to get an electric shock. 4, operating norms operator response equipment structure, working principle, operation procedure, adjustment method have a basic understanding, before the operation to open the power, let preheat packing belt production line for a few minutes, want to adjust the packing belt length, at the same time, of course, also want to listen to the machine interior presence of noise, no abnormal phenomenon such as smoking, according to the thickness of the color box, instructions or customer requirements of each firm quantity packaging, point clear to the number of packaging, use good packing paper, and then into bale with packing belt production line.