Steel belt manufacturer is how to improve the packaging steel strip rolling yield

Processing bundling steel strip is the main effect, can tightly hold the item. To make results more obvious effective bundle, you need to steel belt manufacturer in the production of products of brace, careful attention to every process of production. Careful careful work can not only increase yield, also can effectively improve the yield of steel strip, reduce consumption of metal. Linyi Oriental steel strip co. , LTD. , then to introduce the next is how to improve the packaging steel strip steel belt manufacturer yield? To do a good job of raw material inspection acceptance. Raw materials into the factory check according to the number and weight of the warranty, after inspection, according to the standard of raw materials. Quality and weight do not tally with the warranty to timely report to the relevant management department, to demand compensation from the supplier contact and handling; Strengthen the management of raw materials. Raw materials in the library should take the same specification, same steel grade and heat number sequence neatly stacked. The qualified and unqualified material should be piled up. Should prevent HunHao to prevent mixing specifications, prevent loose volume; Continual production to implement concentrate when policy, unqualified raw materials are not put into production. Feeding when the crane lifting and handling and the library will light up the light, to prevent bulk volume. For the bulk volume as far as possible to volume, shall not be arbitrarily cut waste; Removal of steel strip defects or cutting head cutting tail should minimize the removal. May not be the good metal cutting; Forming welding operation should guarantee the quality of welded pipe, raise a inspection qualified rate, reduce defects and waste. Frequently observed, regular check, frequently adjusted; Improve the operation efficiency, stable starting, reduce outage times; Improve the flying saw scale accuracy, ensure the quality of curf. Curf no deformation, no horseshoe, no residual impalement. Adopt computer control flying saw; To ensure the straightening quality, not the waste products with defects and straightening straightening; Used on machining tube, reduce the waste of tube end processing of metal; Check carefully according to standards, no mistake, no false negatives. To conform to the standard series of products can be modified according to the series. For individual pipe with defects of the parts allow for repair, repair after check again. Production of steel strip is a complex and requires careful work, both heat treatment steel strip and cold treatment steel belt need staff strictly comply with the production system and the fixed, not can be accomplished without norms or standards. Strict is the important indexes of the results. A: on the steel heat treatment process for steel strip for me. 。 。 Next article: after quenching process of steel strip. 。 。