Latest products
Which aspects of the baler should be refueled
by：Hongmei
2021-03-15
What aspects of the packing steel belt manufacturer should refuel the packing machine from?
Any equipment needs to be refueled and maintained during operation, and the baler is no exception, but for the refueling and maintenance work of the baler, many users don’t know where to start. Axiomtek will give you a detailed introduction to the package below. Which aspects of the machine should be refueled:
1. The motor of the baler needs to be refueled. How to refuel the motor, everyone knows that the motor needs to be refueled, and the motor needs to be refueled, but only a small amount of oil is enough. If it is a newly purchased machine, under normal circumstances There is no need to refuel for two years.If you refuel too much or too frequently, the entire movement will be greased.
2. Refueling treatment of the cutter of the baler. Many users have such a misunderstanding that the cutter of the baler does not need to be refueled, but in reality, the baler cuts off the strap by the friction between the knife and the knife. Therefore, it is necessary to add oil and lubrication between the knife sets. If the oil is not added for a long time, the friction between the knife and the knife will increase, and the wear of the knife will be very serious.
3. Other parts that need to be refueled. These parts generally include some drive shafts and anti-rust screw and nut parts
Any equipment needs to be refueled and maintained during operation, and the baler is no exception, but for the refueling and maintenance work of the baler, many users don’t know where to start. Axiomtek will give you a detailed introduction to the package below. Which aspects of the machine should be refueled:
1. The motor of the baler needs to be refueled. How to refuel the motor, everyone knows that the motor needs to be refueled, and the motor needs to be refueled, but only a small amount of oil is enough. If it is a newly purchased machine, under normal circumstances There is no need to refuel for two years.If you refuel too much or too frequently, the entire movement will be greased.
2. Refueling treatment of the cutter of the baler. Many users have such a misunderstanding that the cutter of the baler does not need to be refueled, but in reality, the baler cuts off the strap by the friction between the knife and the knife. Therefore, it is necessary to add oil and lubrication between the knife sets. If the oil is not added for a long time, the friction between the knife and the knife will increase, and the wear of the knife will be very serious.
3. Other parts that need to be refueled. These parts generally include some drive shafts and anti-rust screw and nut parts
